b) Repeatedly press MENU to switch to Sonar menu.
c) Use the Up / Down Arrow to select White Line option.
d) Press ENT to enter into setting.
e) Use the Up / Down Arrow to increase / decrease the value.
f) Press ENT to confirm and exit the setting.
g) Press PWR/CLEAR to exit the setting.
Fish ID. Sens
Fish ID. Sens is used to adjust the threshold of fish size detection.
If you select a higher setting, then some weaker returns can be detected and displayed as
small fish on the screen, which will be very helpful when you are intending to identify small
fish species.
If you select a lower setting, then only strong returns can be detected and displayed as big
fish on the screen, which will be very helpful when you are intending to catch larger fish
species.
When Fish ID. Sens setting is OFF, the system won’t judge whether fish is detected.
To set the Fish ID. Sens.:
a) Press MENU to enter into menu setting,
b) Repeatedly press MENU to switch to Sonar menu.
c) Use the Up / Down Arrow to select Fish ID Sens. option.
d) Press ENT to enter into setting.
e) Use the Up / Down Arrow to increase / decrease the value.
f) Press ENT to confirm and exit the setting.
To Next Page
Loading...