Copyright © 2013, Condor Instruments Ltda. 27
Av. Brigadeiro Luis Antonio, 551, cj 124 - Cep:01318-000
3. It is advisable to synchronize the device time with the time of the user's
computer in order to reduce any accumulated drift. To do this, click in the
SYNC button on the TIME field.
4. It is advisable to wait until the device's battery is fully charged to ensure the
operating time specified. To monitor the state of the battery charge, check
the BATTERY field. When the battery is fully charged, it will be indicated as
CHARGED.
5. With all the desired settings done, the device can be removed from the dock
and it will be already in operation.
REMARKS: After performing the steps 1 – 4 once, the configuration process
can be performed by using the APPLY / SYNC / ERASE Button.
The new configuration will only be applied after delete all data on the device.
When applying a new configuration you will probably see these messages:
A message explaining what will be done, and asking a "permission" to proceed:
A message asking if you want to save the device data before delete it:
To Next Page
Loading...
General