Copyright © 2013, Condor Instruments Ltda. 26
Av. Brigadeiro Luis Antonio, 551, cj 124 - Cep:01318-000
Configuring ActTrust for an Operation
1. The user must delete all data on the device used before starting a new
sampling to maintain data consistency. In order to do so, click the ERASE
button in the LOG field. A window asking if you really want to delete the
data from the device will appear. Click YES.
2. Choose the sampling mode and the sampling interval in the
CONFIGURATIONS field. Click the APPLY button.
Note: the device memory must be erased before applying new
configurations. An alert message will be shown to the user choose to save
the data or not. Another alert message will be shown to the user confirm the
operation to delete the data in the device.
To Next Page
Loading...
General