Copyright © 2013, Condor Instruments Ltda. 31
Av. Brigadeiro Luis Antonio, 551, cj 124 - Cep:01318-000
Extracting ActTrust Data
1. Click the READ button in the LOG field. Wait for the reading to be
performed. The software will freeze while reading.
When the log is completely loaded (100%) the ActStudio will automatically
check if the data has some problem. If the data has some gap, that happens
when the device is connected to the computer and the data is not deleted, or if it
has some 1970 date the ActStudio will show a message asking for a treatment
option. You can read more about this in the subsection entitled "Solving data
problems".
To Next Page
Loading...
General