Copyright © 2013, Condor Instruments Ltda. 62
Av. Brigadeiro Luis Antonio, 551, cj 124 - Cep:01318-000
Tab System
Using the tab system you can generate multiple analysis from the same raw
data. For example: you can generate a periodogram analysis using the PIM
and another one using the TAT.
You can create and remove tabs using the plus and minus signs at the top right
corner of the analysis page.
By clicking on the plus sign a new tab will be created at the end of the current
tabs. By clicking on the minus sign the last tab will be removed.
All tabs are independent and all analyzes will be printed in the report, based on
the options selected in the report settings.
With this feature, it is possible to generate multiple analyzes using the same
raw data and varying its parameters to compare the results obtained.
Analyzes that are able to use the tab system: Chronobiology, Actogram,
Periodogram and Cosinor.
Note: it is possible to create at most 5 tabs of the same analysis.
To Next Page
Loading...
General