44
TABLE OF CONTENTS
TABLE OF CONTENTS 44
PREFACE 47
1 ABOUT THESE OPERATING INSTRUCTIONS 48
2 SYMBOLS AND UNITS USED 49
3 GENERAL 50
3.1 INTENDED PURPOSE 50
3.2 SCOPE OF SUPPLY 50
3.3 TEST MARKS 51
4SAFETY 51
4.1 INTENDED USE 51
4.2 MATERIALS USED 52
4.3 DANGERS DUE TO NON-COMPLIANCE 52
4.4 WATER PRESSURE 53
4.5 ELECTRICAL DEVICES/EQUIPMENT 54
5 INSTALLATION 55
5.1 REQUIREMENTS FOR THE PLACE OF INSTALLATION 55
5.2 INSTALLATION POSITION 55
5.3 ELECTRICITY SUPPLY 56
5.4 MOUNTING THE BUILT-IN ROTARY FLANGE (JQE) 56
5.5 MOUNTING THE BYPASS VALVE (JQU) 57
5.6 MOUNTING THE WATER SOFTENER ON THE PREMOUNTED BYPASS VALVE 58
5.7 WASTEWATER CONNECTION AND SAFETY OVERFLOW HOSE 60
6OPERATION 61
6.1 OPERATING PANEL 61
6.2 MENU FUNCTIONS 62
6.3 COMMISSIONING 63
6.4 MENU STRUCTURE 67
6.5 FUNCTIONAL DESCRIPTION OF THE WATER SOFTENER 68
6.6 SALT FILLING 70
6.7 CONNECTING A LAN CABLE 71
6.8 MODIFICATIONS/CHANGES/SPARE PARTS 71
6.9 SERVICING/REPAIR 71
6.10 STOPPAGES 71
6.11 RESETTING TO FACTORY SETTINGS 72
6.12 DISPLAY MESSAGE OVERVIEW 72
7FAULTS 73
8 MAINTENANCE 74
8.1 CLEANING 74
9 WARRANTY AND SERVICES 74
9.1 INSPECTION BY THE OPERATOR EVERY TWO MONTHS (VISUAL CHECK) 74
9.2 BIANNUAL MAINTENANCE BY THE OPERATOR 75
9.3 ANNUAL MAINTENANCE BY THE CUSTOMER SUPPORT 75
9.4 MESSAGE “MAINTENANCE/SERVICE” 75
10 DATA SHEET 76
To Next Page
Loading...