Conel CLEAR SOFT - Faults and Troubleshooting; Fault Identification and Causes; Clearing Faults

73
7
FAULTS
Help with faults:
Deleting the fault:
/ Press <OK>.
or
/ Disconnect the power supply from the socket and plug it back in after approx. 5 seconds.
The opening of the units and the replacement of the water pressure charged parts
may only be effected by authorized personal in order the ensure the unit security
and its tightness.
Display text Cause Remedy
Achtung! Störung
Reg. Antrieb
Regeneration drive is defective.
Contact customer service! Unplug power
supply! If available, switch the bypass valve
to bypass operation!
Achtung! Störung
Besalzung
Salting process faulty, salt contain-
er too full or leaking.
Check brine level in salt container! Delete
the fault! If failure persists, contact custom-
er service!
Achtung! Störung
Lso-Elektrode
Level electrode is defective.
Delete the fault! If failure persists, contact
customer service!
Achtung! Störung
Tastatur
Keypad is defective.
Delete the fault! If failure persists, contact
customer service!
If you contact the customer support please always keep ready device number and
order number (see fig. 8).