EasyManua.ls Logo

CONOR WRC BAFANG - User Manual

Default Icon
86 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MANUAL DE
INSTRUCCIONES
ELÉCTRICAS
BAFANG / VINKA
ISO-UNE-EN 15194 : 2017
INSTRUCTIONS
HANDBOOK
ELECTRIC BICYCLES
BAFANG / VINKA
Question and Answer IconNeed help?

Do you have a question about the CONOR WRC BAFANG and is the answer not in the manual?

Summary

1. INTRODUCTION

Store this manual with the bicycle

Manual considered part of the bicycle; hand over if sold.

Guidelines for Reading the Manual

Instructions contain safety, operation, and maintenance info. Read before first use.

Queries and Support

Contact dealer or website for queries after reading manual.

2. INSTRUCTIONS ACCORDING TO MODEL

CONOR E-bike Models

Manual covers different CONOR SPORTS S.A. e-bike models for various uses.

3. GENERAL DESCRIPTION OF THE BICYCLE

Riding Risks and User Responsibilities

User assumes risk; apply highway code. E-bikes are legal bicycles.

Manufacturers Policy and Disclaimers

CONOR SPORTS S.A. not responsible for user modifications; reserves right to change specs.

4. BASIC PARTS OF A BICYCLE

Bicycle Components Identification

Diagram illustrating numbered parts of the bicycle for identification.

5. PLACEMENT OF COMPONENTS AND HOW THEY WORK

Using the E-bike Bicycle

Guide to operating the electric pedal assist system for the first time.

Saddle and Seatpost Installation

Instructions for mounting and adjusting the saddle and seatpost.

Handlebar and Stem Installation

Instructions for mounting and aligning the handlebar and stem.

Wheel and Tyre Installation

Centering and mounting wheels, and checking tyre pressure and tread.

Brake System Adjustment

Adjusting brakes and replacing worn brake shoes.

Pedal Installation

Ensuring pedals are properly mounted and revolve around their axle.

Lights Check

Checking light functionality and alignment, and keeping them clean.

Bafang E-bike Component Details

Details on Bafang motor and battery placement and charging.

Vinka E-bike Component Details

Details on Vinka motor and battery placement and charging.

6. REGULATIONS

Component Stress and Wear Considerations

Bicycle components subject to stress and wear; replace if lifetime exceeded.

Applicable Regulation and Standards

Manual meets UNE-EN 15194:2017 EC regulation for E-bikes.

7. HIGHWAY CODE

General Highway Code Rules

Read manual, wear footwear, check brakes, adhere to traffic regulations.

Riding Practices and Traffic Flow

Stay on regulation side, ride alone unless tandem, single file in groups.

Alertness and Road Precautions

Stay alert, be careful at crossroads, use hand signals, use lights at night.

Essential Safety Equipment

Use suitable headlamps/reflectors; use approved helmet; avoid holding onto vehicles.

8. SAFETY AND BEHAVIOUR

Document Symbols Explained

Explanation of warning symbols: Information and Physical Safety Risk.

Prevention: Speed and Usage Guidelines

E-bikes are faster; use bell. Use bicycle as designed; read drive system instructions.

Prevention: Road Awareness and Conditions

Keep eyes on the road, ride according to conditions, identify risks.

Unsafe Riding Practices to Avoid

Do not ride 'no hands', hang objects, or ride under influence of alcohol/medicines.

Prohibited Actions While Riding

Using headphones/mobile phones while riding is prohibited.

Safe Driving Techniques

Overtake with precaution, drive defensively, be prudent in reduced light, be careful on wet/windy roads.

Riding Companionship and Off-Road Safety

Riding accompanied recommended for emergencies; be careful off-road.

Post-Accident Component Checks

Replace damaged components; replace helmet after impact.

Weight Limits and Theft Prevention

Maximum weight limit 130kg. Use a padlock to prevent theft.

Parking and Transport Guidelines

Secure bicycle when parking; use approved devices for transport.

9. MAINTENANCE AND CARE

Professional Servicing Recommendations

Recommend specialist servicing; warranty excludes defects from use.

User Performed Checks

Perform quick checks on steering, brakes, saddle, pedals, and tyres.

Routine Cleaning Procedures

Clean the bicycle regularly with a sponge and specific cleaning solution.

10. ADJUSTING THE BICYCLE

Handlebars, Stem, and Steering Adjustment

Check steering set for play; check handlebars/stem for wear; ensure screws are tight.

Removing the Rear Wheel

Step-by-step guide for removing the rear wheel from the bicycle.

Mounting the Rear Wheel

Instructions for correctly mounting the rear wheel onto the bicycle frame.

Tyre Removal and Mounting

Procedures for removing and fitting bicycle tyres onto the rim.

Tyre Inflation and Seating

Guidance on inflating tyres to correct pressure and seating them on the rim.

Pedal Mounting Instructions

Instructions for correctly screwing in bicycle pedals (left and right) onto crank arms.

Gear System Operation

Explanation of rear derailleur operation and gear changing technique.

Hydraulic Brake Adjustment

Description of hydraulic brake system parts and adjustment procedures.

Hydraulic Brake Maintenance

Advice on brake pad locking prevention, cleaning disks, and bleeding the hydraulic system.

11. PART REPAIR AND REPLACEMENT

Repair Services and Dealer Information

For repairs, contact the dealer or visit the CONOR SPORTS S.A. website.

Spare Parts and Component Replacement

Use original components for replacements; contact your nearest dealer.

12. BICYCLE ACCESSORIES

Helmets and Visibility Requirements

Wear approved helmets; use lights and reflectors for visibility at night.

Padlock Security and General Warnings

Use a secure padlock; accessories like helmets/lights are mandatory.

Accessory Compatibility and Mounting

Check accessory compatibility; incorrect mounting can be dangerous.

13. ENVIRONMENT

Environmental Responsibility Guidelines

Minimize impact, leave no litter, dispose of waste properly, ride on marked paths.

14. WARRANTY CERTIFICATE

Legal Warranty Coverage

Covers legal warranty duration and CONOR SPORTS S.A. guarantee for purchased bicycle.

CONOR-WRC Lifetime Warranty

Additional warranty for frames and rigid forks against manufacturing defects.

Warranty Registration Requirements

Procedure for registering warranty online within 30 days of purchase date.

Warranty Claim Procedures

How to make claims via authorized dealer, required documentation, and alternative options.

Warranty Decision and Repair Policies

Outlines claim acceptance criteria, repair/replacement rights for frames and forks.

Warranty Exclusions and Limitations

Details items not covered: wear, misuse, accidents, non-compatible parts, paintwork.

Component-Specific and Third-Party Warranties

Covers specific parts, non-Conor components, and impact of annual maintenance on warranty.

Accident and Impact Replacement Policy

Information on the frame replacement program for accidents or non-warranty covered reasons.

REGULAR MAINTENANCE

Dealer Pre-Delivery Checks

List of checks performed by dealer before bicycle handover.

Servicing Schedule and Resources

Overview of recommended servicing intervals and component manufacturer resources.

15. ISO-UNE-EN 15194 CONFORMITY DECLARATION: 2017

Product and Manufacturer Details

Manufacturer, product names (Bafang/Vinka models), and year of manufacture.

Standards Compliance and Quality Control

Complies with UNE-EN 15194:2017; quality assured by management system.

CONOR WRC BAFANG Specifications

General IconGeneral
BrandCONOR WRC
ModelBAFANG
CategoryBicycle
LanguageEnglish

Related product manuals