36 EmCORE-i612VLS/C400 User's Manual
Video Select the type of primary video subsystem in your computer. The
BIOS usually detects the correct video type automatically. The BIOS supports
a secondary video subsystem, but you do not select it in Setup.
LCD Panel Type Select the type of LCD.
Halt On During the power-on self-test (POST), the computer stops if
the BIOS detects a hardware error. You can tell the BIOS to ignore certain
errors during POST and continue the boot-up process. These are the
selections:
No errors POST does not stop for any errors.
All errors If the BIOS detects any non-fatal error, POST stops and
prompts you to take corrective action.
All, But Keyboard POST does not stop for a keyboard error, but stops for
all other errors.
All, But Diskette POST does not stop for diskette drive errors, but stops
for all other errors.
All, But Disk/Key POST does not stop for a keyboard or disk error, but
stops for all other errors.
To Next Page