43EmCORE-i612VLS/C400 User's Manual
Integrated Peripherals
↑ ↓ → ←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-SAfe Defaults F7:Optimized Defaults
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Select Enabled to activate each channel separately.
Primary & Secondary Master/Slave PIO
These four PIO fields let you set a PIO mode (0-4) for each of four IDE
devices. When under "Auto" mode, the system automatically set the best
mode for each device
Primary & Secondary Master/Slave UDMA
When set to "Auto" mode, the system will detect if the hard drive supports
To Next Page