48 EmCORE-i612VLS/C400 User's Manual
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed the CPU itself uses when communicating with its
own special components.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset ESCD (Extend-
ed System Configuration Date) when you exit Setup if you have installed a
new add-on and the system reconfiguration has caused such a serious
conflict that the operating system cannot boot.
Resource Controlled By
The Award Play and Play BIOS can automatically configure all the boot and
Plug-and-Play compatible devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields disappear, as the BIOS automatically assigns
them.
↑ ↓ → ←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-SAfe Defaults F7:Optimized Defaults
PnP/PCI Configuration
To Next Page
Loading...
Need help?
General
