Contex SD One+ - Scanner Part Replacement Procedures; Parts List

Service Guide SD One+ 17
Part Replacement
Identifying Parts.
Parts List.
Electronics.
Scanner Controller Board (SULx).
CIS Element.
CIS Cables.
Stepper Motor Assy.
Paper/ Lid Sensor.
USB Cable and Connector.
Power Switch and Connector.
Mechanics.
RHS Cover.
LHS Cover.
Pressure Rollers.
Damper Assy for CIS Bridge.
Top Lid Cover (including Control Panel)
Common Hand Tools.
Torx 10 Straight.
Torx 15 Straight.
Torx 20 Straight.
Note!
Before replacing any electrical parts such as SUx (Scanner Control Unit) or a CIS Elements, try Erasing the Parameter Block and re-calibrate
the scanner in order to force the scanner to re-create the contents of the parameter block. This will solve the problem in most cases.