Contex SD One+ - Error Codes; Software Related Errors

Service Guide SD One+ 66
Appendix D
Error Codes
Software Related Errors
System Error:
262-51
Description:
Error closing file, corrupted image.
Corrective Action:
 Image size and resolution exceeds file format limitations. Reduce resolution or image size
System Error:
55-101
Description:
No scanner found.
Corrective Action:
 Check that the scanner is properly connected and turned on.
 Reboot the system.
System Error:
55-121
Description:
Unknown error.
Corrective Action:
 Restart the system.
System Error:
55-302
Description:
Failed to initialize Basic Calibration.
Corrective Action:
 Check sheet, pressure rollers and glass plate.
 Clean if needed.
System Error:
55-319
Description:
The calibration sheet was not recognized as the right sheet for this scanner.
Corrective Action:
 Please check that the correct sheet is being used.
 Inspect the sheet for scratches or wear, and replace it if the problem continues.
System Error:
55-351
Description:
CIS Alignment and Stitching Failed.
Corrective Action:
 Please check sheet.