Contex SD One+ - Page 67

Service Guide SD One+ 67
System Error:
55-503
Description:
Color calibration failed.
Corrective Action:
 Please clean scanner.
 Please run application again.
 Inspect the sheet for scratches or wear, and replace it if the problem continues.
System Error:
55-509
Description:
IT8 file is not accessible.
Corrective Action:
 If you have received a new Calibration Sheet, please allow application to find reference file over the internet.
 If problem persists reinstall the software to correct the issue.
System Error:
55-513
Description:
The IT8 reference file could not be found on the internet.
Corrective Action:
 Browse to it manually www.contex.com and retrieve the correct IT8 file or use standard.
System Error:
55-523
Description:
Sheet not recognized.
Corrective Action:
 Please clean scanner.
 Please run application again.
 Inspect the sheet for scratches or wear, and replace it if the problem continues.
System Error:
55-530
Description:
When checking new calibration the result was not within the limits.
Corrective Action:
 Inspect the sheet for scratches or wear, and replace it if the problem continues.
System Error:
55-611
Description:
Unknown Scanner Status Error
Corrective Action:
 Reboot system.
System Error:
55-613
Description:
No paper was detected in the scanner.
Corrective Action:
 Place the correct sheet in the scanner.