Reviewing Day Statistics on the Display VFC400-USB User Guide 44
Today's data
Pressing the button displays the current day’s
maximum statistic, in this case, the review starts
with channel 1:
l
The Today marker flashes to indicate that
today's data is being displayed.
l
Today, no temperature values were recorded
above the upper alarm threshold, and no
alarm event was generated.
l
The maximum temperature recorded today was
4.8°C.
l
The paused function is enabled.
Pressing the button again displays the current
day’s minimum statistic:
l
still flashes, as the same day's data (today)
is being displayed.
l
Today, no temperature values were recorded
below the lower alarm threshold, and no alarm
event was generated.
l
The minimum temperature recorded today was
1.4°C.
Yesterday's data
Pressing the button now displays yesterday’s
maximum statistic:
l
The -1 marker flashes to indicate that
yesterday's data is being displayed.
l
Yesterday, recordings above the upper
threshold were recorded, indicated by the
upper alarm threshold marker .
l
The duration value shows the amount of time
recorded above the limit yesterday, which was
12 hours 30 minutes.
l
An alarm was triggered, indicated by the , as
this duration was longer than the allowed time
above the threshold.
l
The maximum temperature recorded yesterday
was 12.9°C.
To Next Page
Loading...
