Setup Pages X-600M Users Manual
which are available to be logged. The window on the right lists the Logged I/O and Registers which
have been selected to be logged. Make the logging selections by first clicking the desired I/O or
register and then clicking the forward arrow buttons (“>>” or “<<”) to move the I/O or resource back
and forth between the lists. When you have completed making the changes, click the Add or
Update button to create the new data log.
FTP Upload Interval:
Enabled or disable periodic uploading of the log file to an FTP server. When enabled, the log file will
be uploaded to a FTP server periodically. When the log file is successfully uploaded, it is erased
from the X-600M. The FTP server settings are configured on the FTP page under Network >
Advanced Network > FTP.
FTP Path/Filename:
This is the filename and path to use when uploading the log file to an FTP server. A time stamp is
appended to the filename every time an upload occurs. Each upload creates a new file.
Page 84 Xytronix Research & Design, Inc.
To Next Page
Loading...