Coolaroo Custom - Page 19

19
+
+
>>>
4
INSTALLATION: Solar Panel and Battery
STEP 2: Mount the Battery
•
Locate where you would like to mount your
Battery. Use the above measuring guide to
pre-drill the holes for the mounting screws (g. E).
CAUTION! The cables and connectors must be
protected from the shade movement.
•
Mount your Battery using the provided 5mm wood
screws.
•
Snap the Battery Covers onto the Battery (g. F).
STEP 3: Attach the Wires
•
Connect the female wire of the battery to the male
wire of the shade motor (g. G).
•
Connect the male wire of the solar panel to the
female wire from the shade motor (g. G).
NOTE: Do not connect the Solar Panel to the
battery. They both connect to the shade motor.
Solar Panel Care
Do not put anything on the Solar Panel that could lter
the sun's rays, such as paint. Clean the photovoltaic
cells at least once a month by wiping them with a so,
wet cloth to avoid scratching them. In the winter, do
not allow snow to build up on the panel.
19 ⁄″
22 ⁄″
1 ⁄″
⁄″
1″
1 ⁄″
⁄″
1″
Mounting Hole Mounting Hole
Clip on
cover
Clip on
cover
E
F
G
Solar-Powered
Motor
Solar
Panel
Battery