Coolerado M50C - Page 33

Coolerado Installation
Page 33 of 63
Time
N/A
Time Zone
Central
Many options
Set Time Format
24 hour
24 hour or 12 hour
Date
N/A
Set Date Format
YYYY-MM-DD
YYYY-MM-DD, or Day, Month DD, YYYY,
or MM-DD-YYYY
Show Fan Icon
No
Yes or No
Show Temp
Yes
Yes or No
Show Humidity
Yes
Yes or No
Show Off Icon
Yes
Yes or No
Show Hold Icon
Yes
Yes or No
Show Setpoint
Yes
Yes or No
Show Alarms
Yes
Yes or No
Show Occ Status
Yes
Yes or No
Show Unit Status
Yes
Yes or No
Show Date/Time
Yes
Yes or No
Level 1
Level 2
(LCD Screen Name)
Level 3
(Default Values)
Available Values
Control Setup
General
Control Mode
Cooling
Auto, Cooling, or Heating
Unit Enable
Enable
Enable or Shutdown
Fan Mode*
Auto
Not Used, On, Auto, Smart
* Fan Coil units only
Max Setpoint Offset
3 degrees
0 to 20 degrees (F or C based on Units
setting under Display Settings menu)
Fan On Delay*
30 seconds
0 to 120 seconds
* Fan coil units only
Fan Off Delay*
30 seconds
0 to 120 seconds
* Fan coil units only
Frost Protection
No
Yes or No
Reset PID Tuning*
No
Yes or No
Auto PID Tuning Enable
Yes
Yes or No
Dehumidification Enable*
No
Yes or No
Aux Mode
Not Used
Not Used, Occupied NO, Occupied NC,
Occupied Fan NO, Occupied Fan NC, On,
Off
Inputs
BI1 Config
Disabled
Disabled, Occupancy, Occupancy
Override, Remote PIR, Dirty Filter,
Service, Fan Lock, Open Door, Open
Window
BI2 Config
Disabled
Disabled, Occupancy, Occupancy
Override, Remote PIR, Dirty Filter,
Service, Fan Lock, Open Door, Open
Window