13COOLIUS A10
4 Preparation for the use and settings
4.1 Switch on the machine
Press the Power Switch (I) to turn on the Machine.
The ventilation security system starts.
Switch on the machine for the rst time
Select the display language
Turn COOLIUS SELECT to select the language, then con-
rm by ENTER.
After selecting the language, you have two possibilities to
work with the machine.
1. Demo-Mode
You can now activate the machine or work in demo mode.
NOTE: All functions will be full working except for the
„Time-Date“ menu, that is not available.
1. Press STOP to use the machine in DEMO MODE. (The
machine start-up and skip the activation procedure).
• The display shows the number of days before the
activation will be necessary to use the machine.
2. Press START to go to Stand-by mode.
2. Machine activation
1. Press START to activate the machine.
NOTE: After 7 days, starting from the rst switch on,
the display will show only this print screen at the
start-up.
2. To perform the activation, go to website
www.coolius-ac.com or call the hotline +497940981888188 and request the UNLOCK CODE related to
the Serial Number written on the display (in this case, the Serial Number is AA000000).
3. Press START to continue with activation.
4. Press STOP to skip the activation procedure and START-up the machine in DEMO MODE.
NOTE: STOP key is available only if there is at least one day left for DEMO MODE, otherwise the
activation is compulsory and only the START key is available.
Select:
Language 03
“START” to activate
the machine.
www.coolius-ac.com
Machine is working
now in DEMO MODE!
Day(s) left 7
Get UNLOCK CODE
register: AA000000
www.coolius-ac.com
To Next Page
Loading...
