COOLIUS A10 - Open Program; Recovery

30
COOLIUS A10
• MODIFY: Overwrite the existing BRAND, MODEL and Quantity elds for the selected vehicle as
shown in CREATION OF A VEHICLE.
See chapter 5.5.1 Creation of a vehicle p. 28
• DELETE: Press START to conrm when the
display shows:
Wait a few seconds.
NOTE: The waiting time increases as the number of
vehicles in the Owner DataBase becomes larger.
The vehicle is now deleted and the machine goes to the Owner DataBase list of vehicles
.
Delete
Confirm by “START”
5.6 Open program
1. Press ENTER to go to selection menu (if in Stand-by
mode).
2. Press ENTER to conrm.
3. Turn COOLIUS SELECT to select the program or more
programs.
The following selections are available:
• “RECOVERY”
• “VACUUM”
• “A/C SYSTEM CHARGE”
• “RECOVERY / VACUUM”
• “VACUUM / A/C SYSTEM CHARGE”
• “RECOVERY / VACUUM / A/C SYSTEM CHARGE”
4. Press ENTER to conrm.
5.6.1 Recovery
1. Turn COOLIUS SELECT to set the value.
• Minimum: 2 min.
• Maximum: 12 min.
2. Press ENTER to conrm.
Open program

Recovery
Residual refrigerant
check.
min. 2