COOLIUS A10 - Using the Printer

14
COOLIUS A10
4.2 Using the printer
The machine has a built-in roll-up printer which can be
used to print the vehicle data and the results of the main-
tenance work.
• Paper width: W 58 mm
• Diameter: D 40 mm
• Paper feed
1
Before a process:
Turn COOLIUS SELECT to select the character then con-
rm by ENTER.
Max 20 characters (plate, chassis, etc...)
.
At the end of a process:
Press START key for printing.
Press STOP key to end.
1
g. 008 roll-up printer
CAR DATA:_
C
567890 AB DEFGHIJKLM
Press “START“ to
print
Service report
Unlocking the machine
The following procedure requires the knowledge of the UNLOCK CODE.
1. By the COOLIUS SELECT enter the UNLOCK CODE.
Once done, conrm by START.
• If the UNLOCK CODE is wrong, repeat the proce-
dure just described.
• If the UNLOCK CODE is correct, press START to
conrm. The machine is activated and shows the
Stand-by mode.
The machine is now activated and displays the standby
mode.
_
A
34567890 BCDEFGHIJK
COOLIUS A10
01-01-2017 10:20:30