COOLIUS A10 - Setting; Machine Set-up

18
COOLIUS A10
4.5 Setting
4.5.1 Machine set-up
The procedure allows to set the machine.
Turn COOLIUS SELECT to select. Press ENTER to conrm.
Recovery data:
• 1 The data are reported on the ticket (refrigerant
quantity and oil).
• 0 The data are not reported.
Turn COOLIUS SELECT to select 1 or 0.
Press ENTER to conrm.
Refrigerant residual check:
The default value is applied in:
A/C DATABASE and FULL SERVICE
Turn COOLIUS SELECT to set. Press ENTER to conrm.
The next menu item is displayed.
Leak test:
The default value is applied in:
A/C DATABASE and FULL SERVICE
Turn COOLIUS SELECT to set. Press ENTER to conrm.
The next menu item is displayed.
Fresh oil:
The default value is applied in:
A/C DATABASE and FULL SERVICE
Turn COOLIUS SELECT to set. Press ENTER to conrm.
The next menu item is displayed.
UV Dye:
The default value is applied in:
A/C DATABASE and FULL SERVICE
Turn COOLIUS SELECT to set the value. Press ENTER
key to conrm.
NOTE: Set
0 to bypass the process
The next menu item is displayed.
Print recovery
data?
1
Residual refrigerant
check
min. 2
Leak test min. 2
PAG Oil ml. 10
UV Dye ml. 6