COOLIUS A10 - Page 22

22
COOLIUS A10
5. Press START key to conrm
Message: If the equipment senses a pressure
lower than the minimum value for the process.
Process START.
Message: If the equipment senses a lower
pressure than the minimum value for the process.
• Replace the external bottle, then press START key to
conrm.
• Press STOP key to complete the process.
Process completed.
6. Close the tank valve and disconnect the red hose from
the tank.
7. Press START key to conrm.
Press STOP key to end.
Confirm by “START”
Check:
Ext. Bottle empty or
tank valve closed.
Vessel charge in
process.
Pressure mb.
Refrigerant g./////
Vessel charge end.
Close the external
tank valve.
Refrigerant recovery
from the
service hoses
Vessel charge end.
g./////