Section 4
Panel Operation
Panel Operation
The Panel is operated via a backlit touch screen. The default screen is shown below, from this
screen all the panels functions can be accessed. Touching the screen causes the backlight to
illuminate after a delay, the display extinguishes automatically if a period of inactivity is detected.
Level 1 0 Faults 0 Disabled 0 In Test Mute Buzzer
Date and time
DD-MMM-YY HH-MM-SS
Some basic functions can be accessed without entering a password, others require higher level
access which is achieved by entering the relevant password.
To access the menus touch “level 1" and enter the password for the relevant access level.
Press enter when number has been entered, use back space to correct entry errors.
Passwords are printed at the rear of this manual (see page 56) it is strongly recommended to
remove these passwords and store them in a safe location to prevent unauthorised access to
system critical functions and parameters.
Back
Change Access Level
Mute Buzzer
Please enter passcode
0
1 2
3
4
5
6
7
8 9
Back
Change Access Level
Mute Buzzer
Enter
Back space
To Next Page
Loading...
