Public Access Level 1 (Mute Buzzer)
A buzzer is provided within the control panel to attract attention to events and faults, to silence
the buzzer touch the mute buzzer button.
Note for applications where the audible alarm is inappropriate it is possible to disable the buzzer
completely (can be reactivated later if required) see page 43
Level 1
0 Disabled
0 Faults X In test
Mute Buzzer
Touch here to silence buzzer.
Public Access Level 1 (On test)
Tests can either be instigated manually (useful to confirm correct operation after maintenance
work) or automatically in response to a pre programmed test regime.
To ensure that an area is not left without cover during the period immediately after a full rated
duration test, multiple test groups are provided.
By setting test groups to operate at different times, testing can be staggered ensuring that only
a small proportion of the emergency lights in a given area are tested at the same time.
Whenever fittings are undergoing either manual or automatic tests, an LED indicator is
illuminated on the mains display, and the LCD display gives details fo which fittings are in test.
Touch here for a list of addresses
currently in test
Touch here for a list of groups
currently in test
Level 1
0 Disabled
0 Faults X In test
Mute Buzzer
Level 1
0 Disabled
0 Faults X In test
Mute Buzzer
Level 1
0 Disabled0 Faults X In test
X Groups
X Addresses
Mute Buzzer
To Next Page
Loading...
