Cooper EASICHECK EC2001 - Page 34

Level 2 (Enable / Disable)
Back
Level 2
Mute Buzzer
Global reset Enable / Disable
View log
Set date / time
Test panel LED’s
View recent results
It is possible to enable / disable individual addresses, entire test groups or an entire loop of
devices connected to a panel.
An enable all button is also provided to re-enable all disabled devices by a single touch of a
button.
Enable / Disable addresses
Enable / Disable addresses
By group
Enable / Disable addresses
By loop
Enable all
Back
Level 2
Mute Buzzer
Level 2 (Enable / Disable)
It is possible to enable / disable
individual addresses, entire test
groups or an entire loop of
devices connected to a panel.
An enable all button is also
provided to re-enable all disabled
devices by a single touch of a
button.
To disable by test group follow a
similar procedure but select
“enable / disable by group
instead.
To disable all devices connected
to a loop, select enable / disable
by loop.
Enable / Disable addresses
Enable / Disable addresses
By group
Enable / Disable addresses
By loop
Enable all
Loop 1
Back
Back
Back
Level 2
Enable / disable
Enable / disable address
Select Loop
Enable / disable address
Loop 1
Mute Buzzer
Mute Buzzer
Mute Buzzer
Enabled
Enabled
Disabled
Loop 1; Address 1; Group 1; SCAEL; Nicad 2 cells
Reception Exit sign
Loop 1; Address 2; Group 1; SCAEL; Nicad 3 cells
Reception Above desk
Loop 1; Address 3; Group 1; SCAEL; Nicad 2 cells
Reception in corridor
Touch here to enable or
disable devices, touch
once to disable, touch
again to re-enable.