CORTINA E-OCTA PLUS - English

NL
DE
EN
69
CUSTOMER MANUAL M400 DRIVE SYSTEM
CONTENT
1 Important Instructions 70
2 Introduction 71
3 Safety Instructions 72
3.1 General Information 72
3.2 For Your Safety 72
3.3 Pedelec tuning is prohibited 72
3.4 Installation and Maintenance 73
3.5 Safety Instructions 73
3.6 Legal Regulations 74
3.7 Intended Use 74
3.8 Quick start 75
3.9 Before the first ride 75
3.10 Before Each Ride 75
4 Electrical Components 76
4.1 Summary of the Components 76
4.2 Important Instructions 76
4.3 Display Screen and Control Panel 76
4.3.1 Functions Overview 77
4.4 Battery 77
4.4.1 Safety Instructions 78
4.4.2 Storing the Battery 79
4.4.3 Battery Wear 79
4.5 Charger 79
4.5.1 Operating Instructions 79
4.6 Drive unit (mid-drive motor) 80
5 Operation 81
5.1 Installing the Battery 81
5.2 Removing the Battery 81
5.3 Charging the Battery 82
5.3.1 Safety Instructions 82
5.4 LED Display for Charge Status and Charging Capacity 83
5.4.1 Sleep Condition 83
5.5 Switching the electrical system on and off 84
6 Displays and Settings 85
6.1 Buttons on the control panel 85
6.2 Indications on the Display Screen 85
6.3 Basic Setting 86
6.3.1 Enter into "SETTING" interface 87
6.3.2 Enter into "Display setting" interface 87
6.3.3 Enter into "Information" interface 90
6.3.4 Error Messages 92
6.4 Usual Operation 93
6.4.1 ON / OFF switch 93
6.4.2 Power assistance level selection 93
6.4.3 Multiple function interfaces switch 93
6.4.4 Headlight/Display Backlight switch 94
6.4.5 Push assistance mode 94
7 Maintenance 94
8 Range of your Pedelec 95
9 Transporting the Bike 95
10 Parts Allowed to be changed on S-Pedelec/Pedelec 96
10.1 These S-Pedelec parts may be changed 96
10.2 These Pedelec parts are allowed to be changed 96
11 Environment Protection Tips / Disposal 97
12 Specifications 98
12.1 Battery 98
12.2 Charger 99
12.3 Drive unit (mid-drive motor) 99
13 Guarantee and Warranty 100
Legal disclosure 100