NL
DE
EN
75
CUSTOMER MANUAL M400 DRIVE SYSTEM
3.8 Quick start
In this section, you will find important information and
instructions that will enable you to safely use your Pedelec
as quickly as possible.
Read the safety instructions first and inform yourself on the
legal regulations which apply to you.
Perform all of the security checks as instructed under
the section “Before each ride”.
Read the instructions on how to charge the battery in the
chapter “Charging the Battery”.
• Charge the battery until it is fully charged.
• Insert the battery.
• Lock the battery.
• To start the system, push the “
“ button on the
operating unit.
• Select the desired support level via the control unit.
àThe Pedelec is now ready for operation.
Always squeeze the brakes of your Pedelec before placing a
foot on the pedal! The motor starts propelling as soon as
you step on a pedal. This boost is unusual and can lead to
falls or cause dangerous traffic accidents and injury to occur.
1
2
3.9 Before the first ride
• Before each ride, fully inspect the bike as described in
the operating manual under the section “Before each
ride”.
• Charge the battery until it is fully charged.
• Make sure that the battery is sitting securely in its
place and is locked into place.
• Please ensure that your Pedelec is ready for use and is
adjusted to your body.
Practice operating and riding your Pedelec in a calm and
safe place before you take to public roads.
Please also consult the additional user manuals, issued by
the individual component manufacturers and which were
supplied with your Pedelec or are available online.
3.10 Before Each Ride
Do not start riding your bike if you think your Pedelec may
not be in perfect condition. Have a retailer check your bike.
Be sure to have a specialist check all of the bike’s important
parts on a regular basis, especially if you ride your Pedelec
intensively. A component may suddenly malfunction if you
use it beyond its lifespan or recommended period of use.
This may lead to accidents and serious injury.
Before each ride, fully inspect the bike as described in the
operating manual under the section “Before each ride”.
Please make these checks before continuing after a fall or if
your Pedelec has fallen over. Aluminum parts cannot be
safely bent back into shape, while carbon components can
sustain damage which is not recognizable to the eye.
To Next Page
Loading...
