To Next PageTo Next PageWhat to do if coship Receiver RCU is not working?
If the coship Receiver's RCU (Remote Control Unit) isn't working, it could be due to exhausted batteries. Try changing the batteries. Alternatively, ensure that the RCU is aimed correctly at the unit and that nothing is blocking the front panel.
Why is there interference on my coship Receiver digital satellite channel?
Interference on your digital satellite channel of coship Receiver may occur because the system is connected using RF leads, and the receiver's output channel interferes with an existing terrestrial channel or video signal. To resolve this, change the receiver's output channel to a more suitable one, or connect the system using SCART leads.
Lists the primary features and capabilities of the digital satellite receiver.
Provides essential safety precautions for operating and handling the STB.
Guides on how to connect the satellite antenna and television to the STB.
Illustrates the connection procedure using RCA cables for audio and video.
Details the connection process using an S-Video cable for improved video quality.
Configures antenna settings for DiSEqC 1.2 compatible satellite systems.
Configures antenna settings for fixed satellite dish installations.
Performs channel scanning for DiSEqC 1.2 systems.
Performs channel scanning for fixed satellite dish installations.
Restores the STB to its original factory default settings.
Explains methods to select channels using buttons or the channel list.
General