16
UNPACK OVEN
WARNING
EXCESSIVE WEIGHT HAZARD
• Use two or more people to move and install oven. Failure to do so can
result in back or other injury.
1. Rem
ove all tape and packaging materials from around the oven.
2. Open
the oven door and remove packaging materials and oven racks
inside the oven.
3. Che
ck for film on stainless steel parts, padding/spacers on and around
door and face of oven, cardboard and plastic on and around racks, etc.
Failure to remove packaging materials could result in damage to the
appliance. Do not dispose of anything until the installation is complete.
NOTE:
• Do not remove any warning-type labels, the model and serial number
label, or the Tech Sheet that is located on the back of the oven.
• Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can damage
the surface of your oven.
• Do not lift the oven using the oven door handle. Doing so can cause
damage and improper operation of the oven.
• Do not move the oven by grabbing the open oven door. Doing so can
result in serious damage to the oven.
To Next Page
Loading...
Need help?
General
