13
ELECTRICAL REQUIREMENTS
ELECTRICAL SHOCK HAZARD
ELECTRICAL GROUNDING INSTRUCTIONS
• Do not use an extension cord with this appliance.
• Remove house fuse or open circuit breaker before beginning
installation.
• Improper connection of aluminum house wiring to copper leads can
result in an electrical hazard or fire. Use only connectors designed for
joining copper to aluminum and follow the manufacturer’s
recommended procedure closely.
• This appliance must be properly grounded.
• Do not ground to a gas pipe.
• Check with a qualified electrician if you are in doubt as to whether the
appliance is properly grounded.
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169
U.S.A. ONLY
Be sure that the electrical connection and wire size are adequate and in
conformance with the National Electrical Code, ANSI/NFPA No. 70 - latest
edition and all local codes and ordinances.
A copy of the above code standards can be obtained from:
WARNING
To Next Page
Loading...
Need help?
General
