COVANA Evolution Series - Page 13

INSTALLATION MANUAL GLOSSARY 13
Non-motor-side
jack
The non-motor-side jacks are a main part of the Covana cover.
They and the motor-side jacks enable the cover to move.
Operator
The operator powers and controls the lifting mechanism of the
Covana cover. It contains the motor and the limit switches.
Sleeve
The sleeves make up the aluminum case for the lifting mechanism
of the Covana cover. They protect the components and connect the
jacks and the cover.
U-frame
The U-frames protect the mechanical parts resting on the
foundation and connect all four posts.
Wiper bracket
The wiper bracket is adhered under the I-beams using double-faced
tape. This part is required to ensure waterproofing of the Evolution
cover.
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24