Output Characteristics
Technical Specifications
Force FX Electrosurgical Generator C User’s Guide 9-15
CEM Coag
Output Waveforms
Instant Response technology, an automatic adjustment, controls all bipolar modes and all
cut modes. It does not control the coag modes because of their fulguration capabilities.
As tissue resistance increases from zero, the generator outputs constant current followed
by constant power followed by constant voltage. The maximum output voltage is
controlled to reduce capacitive coupling and video interference and to minimize sparking.
Bipolar
Monopolar Cut
12345678910
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
45 50 55 60 65 70
Precise 470 kHz sinusoid
Standard 470 kHz sinusoid
Macro 470 kHz sinusoid
Low 390 kHz sinusoid. Similar to the Pure cut mode except
the maximum voltage is limited to a lower value.
Pure 390 kHz sinusoid
Blend 390 kHz bursts of sinusoid, recurring at 27 kHz
intervals; 50% duty cycle
To Next Page
Loading...
