Need help?Do you have a question about the CPAP Freedom and is the answer not in the manual?
PCB protection, durable shell, UN 38.3 tested.
4-hour charge time, 400-500 cycles, 1-year warranty.
Identifies DC IN, DC OUT, USB OUT, indicator button, display screen.
Connect AC supply to battery and wall outlet; approx. 4 hours.
Connect AC supply via pigtail cord to both batteries' DC IN jacks.
Needs 12V adapter; includes battery kit and adapter.
Connects directly via pigtail/tip; requires battery kit.
Opposite polarity requires 150W sine wave power inverter.
Battery kit and 150W Sine Wave Power Inverter.
IntelliPAP 1 direct via pigtail/tip "J"; IntelliPAP 2 needs 150W inverter.
Needs 150W inverter; follow sequence to prevent "tripping" circuitry.
Connect pigtail to both DC OUT, input cord to pigtail, inverter to input cord; follow sequence.
Requires 150W inverter; battery kit is essential.
Plug DC input into battery DC OUT, inverter into input cord, PAP supply into inverter.
Connect pigtail to both DC OUT, input cord to pigtail, inverter to input cord, PAP supply to inverter.
Factors include humidification, pressure, leaks, BiLevel, device models.
General| Battery Type | Lithium-ion |
|---|---|
| Output Power | Up to 90W |
| Charging Time | 4-5 hours |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Output Voltage | 12V |
| Compatibility | Most CPAP and BiPAP devices |
To Next Page