20
GROUNDING INSTRUCTIONS
In the event of a malfunction or breakdown, grounding provides the path of least
resistance for electric current to reduce the risk of electric shock.
This tool is equipped with a power cord, which has an equipment-grounding
conductor and a grounding plug.
The plug should be plugged into a matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances. Do not modify the
plug provided – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
Improper connection of the grounding conductor can result in a risk of electric
shock. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-
hole receptacles that accept the tools plug.
If the power cord becomes damaged or worn, replace it immediately.
The CRAFTEX B2397 table saw is intended for use on a circuit with an outlet for
the grounding pin on the plug. If a three-prong to two-prong adapter is used, then
make sure the grounding lug on the adapter is grounded properly.
To Next Page
Loading...
