3
GENERAL SAFETY INSTRUCTIONS
EXTREME CAUTION SHOULD BE USED IN OPERATING ALL POWER TOOLS. KNOW YOUR POWER TOOL, BE
FAMILIAR WITH ITS OPERATION. READ THE OWNER’S MANUAL AND PRACTICE SAFE USAGE PROCEDURES
AT ALL TIMES.
CONNECT your machine ONLY to the matched and specified power source.
WEAR SAFETY GLASSES, RESPIRATORS, HEARING PROTECTION and SAFETY
SHOES when operating this machine.
DO NOT wear loose clothing or jewellery when operating machinery.
A Safe Environment is important. Keep the area free of dust, dirt and other debris
in the immediate vicinity of the machine.
BE ALERT! Do Not Use prescription or other drugs that may affect your ability or
judgement to safely use this machine.
DISCONNECT the power source when changing, blades or doing any maintenance
and or repairs.
NEVER leave an operating tool unattended.
NEVER reach over the table when the tool is in operation.
NEVER make crosscuts with the rip fence in place.
NEVER attempt cut material that is warped or twisted.
ALWAYS keep blades, knives or bits sharp and properly aligned.
ALWAYS keep all safety guards in place and ensure their proper function.
ALWAYS use push sticks and featherboards to safely feed your work through the
machine.
ALWAYS make sure that any tools used for adjustments are removed before
operating the machine.
ALWAYS secure your work with the appropriate clamps or vises.
ALWAYS keep bystanders safely away while operating machinery.
THINK SAFETY. WORK SAFELY. Never attempt a procedure if it does not feel safe
or comfortable.
To Next Page
Loading...
Need help?
General
