Creality CR-10 Series User Manual

CR-10 Series 3D Printer User Manual
l The User Manual is for the CR-10 Series of 3D printers. It is also
applicable for the CR-10S/CR-10 S4/CR-10 S5.
l But CR-10 mini without T-Bracket (Right) & Decoration Strip.
l Due to the different types of devices、hardware and software
upgrade, it is normal if the devices have little different. Please be
subject to the actual products.
l Detailed instructions for using are available on the TF card.
V5.1

Creality CR-10 Series Specifications

General

Build Volume	300 x 300 x 400 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD Card, USB
Bed Temperature	Up to 100°C
Power Supply	110V/220V, 360W
Nozzle Diameter	0.4 mm (can be replaced with other sizes)
Supported Materials	PLA, ABS, PETG, TPU
Display	LCD
Frame Structure	Aluminum frame