Creality CR-10 Series User Manual

03/
Device Installation
Note: Make sure that the nut for
pro file h as b een turne d by 90°
before fastening the
T-shaped fixing block.

M5X25
4pcs
*CR-10 mini without T-Bracket (right).
u Install the Gantry Frame
u Install the T-Shaped Fixing Block.

Creality CR-10 Series Specifications

General

Build Volume	300 x 300 x 400 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD Card, USB
Bed Temperature	Up to 100°C
Power Supply	110V/220V, 360W
Nozzle Diameter	0.4 mm (can be replaced with other sizes)
Supported Materials	PLA, ABS, PETG, TPU
Display	LCD
Frame Structure	Aluminum frame