Creality CR-10 Series User Manual

Set Temperature of
the Nozzle
Current Temperature
of the Nozzle
Set Temperature of
the Hot Bed
Current Temperature
of the Hot Bed
Part Cooling Fan
Speed
Current Location of
the nozzle
Print Time
Print Progress
Prompt Message
Print Speed
Device Model
Push：OK/Enter Sub Menu
Turn：Change Option/Value
05/
Screen Information
Screen Information
Menu
Sub Menu
Explanation
Info Screen↑
Main↑
Return
Prepare→
Auto Home
Return to Zero
Move Axis→
Moving X Y Z axis or Extruder by
inputting
Bed Auto Leveling
Disable Steppers
Close motor and move X Y Z axis by
hands
Change Filament
Preheat PLA
Preheat ABS
Cooldown
Close and cooldown the nozzle
Control→
Temperature→
Heat the nozzle and bed or change fan
speed by inputting number
Restore Failsafe
Restore factory setting
Language
English/Chinese
No SD card/
Print from TF
Select the printing model
Init. SD Card
/Change SD
Card
Printing
Tune→
Speed
Change Printing Speed by inputting
Nozzle
Change the temperature by inputting
Bed
Change the temperature by inputting
Fan Speed
Change Fan Speed by inputting
Flow
Change filament flow by inputting
number
Pause Print
Can choose to continue printing
Stop Print
Reprint or choose another model to print
S

Creality CR-10 Series Specifications

General

Build Volume	300 x 300 x 400 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD Card, USB
Bed Temperature	Up to 100°C
Power Supply	110V/220V, 360W
Nozzle Diameter	0.4 mm (can be replaced with other sizes)
Supported Materials	PLA, ABS, PETG, TPU
Display	LCD
Frame Structure	Aluminum frame