Thank you for choosing Creality. For your convenience, please read through this User Manual before you start and follow
the instructions provided carefully.
Creality is always ready to provide you with high-quality services. If you encounter any issues or have any questions when
using our products, please use the contact information at the end of this manual to contact us. To further improve your
user experience, you can find more about our devices via the following methods:
User manual: You can find instructions and videos in the USB flash disk provided with the printer.
You can also visit our official website (https://www.creality.com) to find information regarding software, hardware,
contact information, device instructions, device warranty information, and more.
1. You can upgrade the firmware directly through the device screen;
2. You can upgrade the firmware via the Creality Cloud OTA;
3. Please visit the official website https://www.creality.com, click on Service Center → Firmware/Software Download →
Download the required firmware, install and use it.
To Our Dear Users
Firmware Upgrade
Videos showing the operation of the products and after-sales service
1. Please visit https://www.crealitycloud.com/product, click “Products" and select the right model, and then click “Related"
to view the tutorials on after-sales service;
2. Or contact our after-sales service center at +86 755 3396 5666, or send e-mail to cs@creality.com.
To Next Page
Loading...
Need help?
General
