5.First Printing
5.3 USB flash disk Printing
16
① Insert the USB flash disk into USB port
② Select the model from the USB flash disk ③ Click on “Print"
Tips:
① Keep the dip switch locked before printing.
② For details on using the software, please refer to the slicing software user manual on the USB
flash disk.
③ Saved files must be placed in the root directory (not a subdirectory) of the USB flash disk.
④ It is recommended to use Latin alphabet, numbers, and commoncharacters for the file names.
The current interface is for reference
only. Due to the continuous upgrading
of functions, it shall be subject to the
latest software/firmware UI published
on the official website.
DIP switch
To Next Page
Loading...
Need help?
General
