Creality LD-002R User Manual

Load Resin
Pour the UV photosensitive resin into the resin vat. The slot capacity is 140ml / 170ml /
225ml / 285 ml.
TIPS:
How to change resin:
Takt out the resin vat slowly, pour out the remaining resin into the container, clean the
resin vat, pour in new resin, and then install the resin vat to the machine.
CAUTION:
Resin may cause skin irritation or an allergic skin reaction. Please wear gloves before use
to avoid direct contact with the skin.

Creality LD-002R Specifications

General

Technology	LCD-based SLA
Build Volume	119 x 65 x 160 mm
Z-axis Positioning Accuracy	0.00125 mm
Print Speed	20-30 mm/h
Connectivity	USB
Software	ChiTuBox
Power Supply	100-240V, 50/60Hz
Operating System	Windows, Mac OS
Resin Compatibility	405 nm UV resin
XY Resolution	0.047mm (2560 x 1440)
Light Source	UV LED
Supported File Formats	STL
Printer Dimensions	221 x 221 x 403 mm