White Rabbit Switch - WRS
If you have firmware version 4.0 or lower you should use mentioned below procedure:
Please use the Management Mini-USB - #4
1. Download the flashing package and extract it.
2. Download the latest stable release of the WRS firmware in a tar.gz package.
3. Connect the Management Mini-USB port to the PC
4. Start the flashing procedure by executing in a linux console:
Creotech Instruments S.A. tel. +48 22 233 10 27
ul. Gen. L. Okulickiego 7/9 e-mail: support@creotech.pl
05-500 Piaseczno, Poland www.creotech.pl
Page 25 of 30
To Next Page
Loading...
Need help?
General