Crestron Mercury CCS-UC-1 Do Guide

Supplemental Guide – DOC. 7844E CCS-UC-1: Crestron Mercury Tabletop Conference System • 9
Manage Certificates Screen
b. Click the Machine tab. The current machine certificate is displayed.
c. Click to delete the certificate from the list of certificates.
d. Click Add Machine Certificate. The Add Certificate screen is displayed.
Add Certificate Screen
e. Click Browse, select the certificate file, and click Open.
f. When prompted, enter the password used to encrypt the file.
g. Click Load to upload the certificate to the CCS-UC-1. A message
confirming the upload is displayed.
h. Click OK to close the Add Certificate screen.
4. If authentication server validation is not used, set Enable Server Validation to
Disabled and continue to step 6. Otherwise, set Enable Server Validation to
Enabled and select the trusted certificate authorities to use.
• To select all of the authorities, click the check box next to the search box.
To unselect all of the authorities, click the check box again.
• To search for a specific authority, start typing the name of the authority in
the search box and check the box next to the desired authority.
5. Click Manage Certificates to manage certificates for 802.1x authentication. A
list of certificates is displayed.

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English