34 • CCS-UC-1: Crestron Mercury Tabletop Conference System Supplemental Guide – DOC. 7844E
Room Schedule Screen
Click Room Schedule Screen to control information displayed on the display device, and
control custom logos and backgrounds shown on the display device when not in use.
AVF Screen - Front - Room Schedule Screen
• Enter the amount of time before information about the next scheduled meeting is
displayed in the
Next Meeting Information Shown field.
• If the HDMI input cable is not to be used, select Hide Wired Cable Connection to
hide instructions for connecting an HDMI source. If the cable is to be used and
Hide Wired Cable Connection is not selected, a detailed message can be entered
in the
Cable Connection Details field.
• A custom logo can be displayed in the lower right corner of the display device when
the system is not in use. To use a logo or other graphic, select
Enable Custom
Logo Graphic and enter the URL where the graphic is located in the Custom Logo
Graphic URL field.
NOTE: The optimal image size is 480 x 94 pixels. Custom graphics that are larger
than 480 x 94 pixels are scaled down while maintaining their aspect ratio. Custom
graphics that are smaller than 480 x 94 pixels are not scaled up and should be
resized for optimal image display.
• A slideshow of custom backgrounds can be shown on the display device when the
system is not in use. To use custom backgrounds, select Enable Custom
Backgrounds and enter the URL where the background images are stored in the
Add Custom Background Url field. To specify the length of time that each
background image is displayed, enter a time (in seconds) in the
Interval Between
Backgrounds field.
NOTE: The interface has been designed to use most of the screen area for
informational purposes. This feature is intended to incorporate corporate colors,
branding, and aesthetics for corporate branding to the particular organization and
should not be used to add custom instructions for room users.
When all changes are made, click Save to save the settings.