Crestron TS-70 Series User Manual

Product Manual — Doc. 8555F TS-70 Series • 79
Use the setup screens to configure various settings for the touch screen, including Ethernet
setup, IP table setup, audio setup, display setup, standby timeout,Wi-Fi network setup, and
diagnostics.
NOTE:Time zone settings do not need to be configured on the touch screen, as these
settings will be pushed to the touch screen from the control system running Crestron Home.
Access the Web Configuration Interface
The touch screen provides a web configuration interface that is used to view and configure
various touch screen settings. The interface can be accessed using the touch screen IP address.
To access the web configuration interface using the touch screen IP address:
1. Ensure that the touch screen is connected to the network.
2. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen
and its IP address on the network.
3. Enter the touch screen IPaddress into a web browser.
Create an Admin Account
The first time the web configuration interface is accessed, a page is displayed asking the user to
create an admin account. A similar message is displayed when connecting to the control system
in Crestron Toolbox software if an admin account has not already been created.
To create an admin account:
1. Enter a username and password for the admin account in the appropriate text fields.
CAUTION:Do not lose the username and password for the admin account, as the
control system must be reset to factory settings to regain access.

Crestron TS-70 Series Specifications

General

Brand	Crestron
Model	TS-70 Series
Category	Touch Panel
Language	English