Crestron TSS-770 - Usb

30 • TSS-770 and TSS-1070 ProductManual—Doc.8745C
l Link Active: Reports the status of the Ethernet connection (A true message indicates that
the Ethernet connection is active, while a false message indicates that the Ethernet
connection is inactive.)
l MAC Address: The unique touch screen MAC (media access control) address
Click the + (plus)icon next to WI-FI to display the following Wi-Fi network settings:
l Domain: The Wi-Fi network domain name
l DHCP: Reports whether the Wi-Fi network IP address is static (Yes) or dynamic (No),
shown only if a Wi-Fi network connection is enabled
l IP Address: The Wi-Fi network IP address, shown only if a Wi-Fi network connection is
enabled
l Subnet Mask: The Wi-Fi network subnet mask address, shown only if a Wi-Fi network
connection is enabled
l Default Gateway: The Wi-Fi network gateway router address, shown only if a Wi-Fi
network connection is enabled
l Link Active: Reports the status of the Wi-Fi network connection (A true message indicates
that the Wi-Fi network connection is active, while a false message indicates that the Wi-Fi
network connection is inactive.)
l MAC Address: The unique Wi-Fi network MAC (media access control) address
Click the + (plus)icon next to LAN to display the following LAN settings:
l Network Proxy Settings: Reports whether network proxy settings are enabled or disabled
for the touch screen
For more information on configuring network settings, refer to System Setup (on page32).
USB
Click USB to view the status of a connected USB accessory, such as a room scheduling hallway
sign or light bar.
Status Tab - USB
The following USB information is displayed:
l Accessory Connected: The name of the connected accessory
l Accessory Type: The type of connected accessory