Crestron TSS-770 - Initial Setup and Configuration; Accessing Setup Screens

2 • TSS-770 and TSS-1070 Product Manual — Doc. 8745C
Access the Setup Screens
The setup screens enable basic configuration prior to regular operation of the touch screen.
To access the touch screen's built-in setup screens during regular operation, place five fingers on
the display and hold for 15 seconds.
The main Setup screen is displayed (TSS-770 shown).
TSS-770 Setup Screen
NOTE:Thetouch screen also provides a web configuration interface that may be used to view
and configure various touch screen settings. For more information, refer to Web Configuration
(on page23).
The Setup screen shows the IP address and hostname of the touch screen and provides the
following configuration selections:
l Buttons for Ethernet setup, application selection, Wi-Fi® network setup, diagnostics,
Bluetooth® beacon configuration, and the virtual toolbar.
l An About button that provides information about the touch screen.
The functions of each button are detailed in the following pages of this guide.
NOTE: A toolbar is present on the bottom of all setup screens. The toolbar provides a gear
button that may be tapped to return to the Setup screen and a Save & Exit button that
may be tapped to save all settings, to exit the setup screens, and to return to the selected
scheduling application.