Crystal DBH50R - Battery Charging Procedures and Indicators; Charging Indicator Meanings; Charging Time and Post-Charge Removal

BATTERY INFORMATION
You can charge the battery or transceiver separately.
1.
Plug
the
AC adaptor into the AC outlet, and then plug the cable of the AC adaptor into the DC jack
located on the back of the Charger.
Charging indicator---Green
B. Charging indicator---Red
3.
Fully charged. Charging indicator--Green
Note:
It
takes approximately 4 hours to fully charge the battery. But, the actual
2.
Plug the battery or transceiver into the charger.
A. Make sure that the battery is well connected with charging connectors.
charging t
ime depends on the dump battery. After fully charged, please remember
to remove the battery or transceiver out of charger. Over charging will shorten the
battery life and reduce its performance.