key to confirm and exit.
Display Mode Setup
There are display modes as channel number display, channel frequency+ channel number display
BACKGROUND OPERATIONS
and channel name display, 3 modes in total for option.
1. Press and hold [PF1] key till the transceiver emits “a tone”, and then release it
to enter into background operation.
2. Press
!"#$%&&'#()*
+,-.")(&/%'0%"
Scan Dwell Time Setup
There are three kinds of scan dwell time to be optional.
1. Press and hold [PF1] key till the transceiver emits “a tone”, and then release it to enter into
background operation.
2. Press
key to choose No.10 function item. It shows “SCANTM” on LCD.
3. Press
key to enter into function menu setup.
4. Press key or key to choose the desired dwell time:
5S:
Once the radio receives a matching signal, Scan mode will stop for 5
seconds and then continue scanning.
10S:
Once the radio receives a matching signal, Scan mode will stop for 10s
and then continue scanning.
5. Press
to back to previous menu and key or
key to choose No.11 function item. It shows “DSP” on LCD.
To Next Page
Loading...